ADVANCED SCOOTER WORKSHOP LATEST VERSION TOOL

Product code: asw old

Available quantity In stock

!!! THIS PRODUCT IS NON-REFUNDABLE AND NON-EXCHANGEABLE. MAKE SURE BEFORE YOU BUY IT !!!

!!! WE DO NOT PROVIDE ANY MORE TECHNICAL INFORMATION HOW INSTALL OR USE, MAKE SURE BEFORE YOU BUY IT  !!!

19500 inc VAT
Have any questions about this item? Ask

Tool that will definitely help you to save many hours of time when solving lost key problems on PIAGGIO, GILERA, APRILIA, DERBI, VESPA and PEUGEOT motor scooters. No drilling or cutting of ignition controller plastic enclosure, no scraping of green filling, no soldering is necessary - all memory functions works by K-Line. USB / K-Line interface connects to the ignition controller only with 4 wires. Key data for T5-11 transponder is calculated after EEPROM data reading procedure.

NOTE: This tool does not have ability to program transponder with calculated key data by itself. Any transponder programmer with T5 transponder programming capability is suitable to perform final key-making steps. Transponders are also not supplied with this tool.

Supported ignition (CDI) / Injection controllers :

EFI TECHNOLOGY PGN04 with STM8S105 MCU (NEW!)

READ key data for programming to the T5 transponder

PHILIPS TSDI / DiTECH / PUREJET with TQFP-64 MC68HC908AZ60A (3K85K) MCU

 

READ/WRITE MC68HC908AZ60A internal EEPROM by K-Line
READ/WRITE external SPI EEPROM 25C160 by K-Line
READ MC68HC908AZ60A full 64K memory area
CLEAR FAULT MEMORY (NEW!)
RESET TO NEW / IMMO-OFF (NEW!)

 

MAGNETI MARELLI IAW 5AM HW103 / HW610 injection control module (HYBRID) with EEPROM 95160

READ / WRITE of external EEPROM 95160 by K-Line
RESET TO NEW (NEW!)

MAGNETI MARELLI with TQFP-64 MC68HC05Bxx (0D54J, 0D60J) MCU (system type ACI100, ACI50X, ACI60X)

READ / WRITE of MC68HC05B8/B16 internal EEPROM by K-Line
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder
CALCULATE CRC of key data blocks


EFI TECHNOLOGY with ST72C334 / ST72F521 MCU and 95040 / 95080 EEPROM (system type ACII, AC2I, AC5I, AC8I, AC19I, AC20I, AC21I, AC23I, AC25I AC32I etc.)


READ / WRITE of ST72C334 internal EEPROM by K-Line
READ / WRITE of external 95040 or 95080 SPI EEPROM by K-Line
READ data of TRANSPONDER KEY in the ignition lock by K-Line. Any of EFI TEECHNOLOGY CDI now can be used as a simple transponder reader for scooter keys

RESET of previously used CDI controller to the FACTORY state
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder
CALCULATE CRC of key data block


MAGNETI MARELLI IMM003/IMM006 immobilizer module with 28 pin MC68HC05E6 (0F82B, 0G72G, 2F75B) MCU


READ / WRITE of MC68HC05E6 (0F82B / 0G72G) internal EEPROM by K-Line
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder
RESET of previously used Immobilizer Control Unit to the FACTORY state

MAGNETI MARELLI MIU1 (32MIU1) injection control module / throttle body with ST10F269-T3 MCU


READ KeyData memory block from FLASH of ST10F269-T3 by K-Line
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder

MAGNETI MARELLI MIU2 (32MIU2) injection control module / throttle body with ST10F269-T3 MCU and EEPROM 95160


READ KeyData memory block from FLASH of ST10F269-T3 by K-Line
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder


MAGNETI MARELLI MIU4 (32MIU4) injection control module / throttle body with ST10F269-T3 MCU and EEPROM 95160


READ KeyData memory block from FLASH of ST10F269-T3 by K-Line
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder


MAGNETI MARELLI MIU G3 (32M3G1 / 38M3G1) injection control module / throttle body with Infineon SAK-XC2060 and EEPROM 95320


READ / WRITE of external EEPROM 95320 by K-Line
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder
RESET of previously used Injection Control Unit to the FACTORY state
CALCULATE CRC


MAGNETI MARELLI IAW15 injection control module with MOTOROLA MC68HC11F1 (2E87J) MCU


READ / WRITE of internal MC68HC11F1 EEPROM by K-Line
CALCULATE MASTER key data for programming into the T5-TYPE11 transponder
RESET of previously used Injection Control Unit to the FACTORY state
CALCULATE CRC

ORIGINAL ITEM FROM MANUFACTURER, ITEMS SUPORT TECHNICAL INFORMATION, SOFTWARE LICENCES BY HARDWARE, UPDATES (if available), WARRANTY REPAIRING, AFTER WARRANTY REPAIRING, GOODS NOT POSIBLE BACK

DOWNLOAD LATEST SOFTWARE

Write
Call us